Model 
 RY-220-FX 
 RY-220-ST 

 Function 
 Wire and Cutting (closed loop), both ends of the strip (automatically set stripping length), both ends of the pressing (pressing the sink with the buffer structure), both ends of the half-peeled, cut into the depth of the automatic setting, pressing position is automatically set , step operation 

 Ability 
 0.8 seconds / root (# 28 to # 24 the minimum cut length) 

 0.9 seconds / root (# 32 to # 30 the minimum cut length) 
 0.8 seconds / root (the minimum cut length) 

 Wire size 
 0.03 ~ 0.2mm2 (UL1571 equivalent to AWG # 32 ~ # 24) * The following cortical diameter 2.0mm 
 0.2 ~ 2.0mm2 (UL1007 equivalent to AWG # 24 ~ # 14) * The following cortical diameter 3.4mm 

 Wire cutting length 
 40 ~ 9999mm 

 Cut length accuracy 
 Cut length less than 100mm long precision cutting error of 0.5mm + (set cut length × 0.002) 

 Cutting length 100mm above error 1.0mm + (set cut length × 0.002) 

 Stripping length 
 1 side: 1.0 ~ 10.0mm2 side: 1.0 ~ 17.0mm 

 Depth of cut 
 Maximum adjustment amount 2mm 100setp (1step = 0.02mm) 

 Crimping capacity 
 19,600 N (equivalent to 2 tons) × 2 sets of low-noise specifications 

 Detection device 
 Reduced pressure, pressing error, skinning error (contact), with or without wires, wire overload, abnormal deviation of wire, crimping machine manual adjustment knob 

 Power supply 
 Phase: AC180 ~ 242V 50/60HZ 10A 単 phase: AC207 ~ 242V 50/60HZ 10A 

 High-pressure gas 
 0.5 MPa (5kgf/cm2) about 140NL/min (Please use a clean, dry gas) 

 Dimension? Weight 
 1,300 W × 1,480 D × 1,450 H (mm) (excluding protrusions) of about 500 kg 

 Rui Yang Automation Co., Ltd. Xiamen 

 Address: Xiamen Tongan Fengshan one in 149 8 (Tongan court next) 

 National Sales hotline :400 -887-0592 

 E-mail: ry@xmryzdh.com lhj8x@sina.com 

 Mobile: 18059243888 

 Tel :0592 -7262618 

 Fax :0592 -7130238 

 Code: 361100