(Double-ended) Crimping Machine Fully automatic terminal crimping machine terminal machine debugging Model: automatic (double-ended) Crimping Electrical wire size: 0.05 ~ 2.0m ㎡ (equivalent to UL1571 # 30 to # 14) wire cortex, the outer diameter of the maximum diameter of 4.0 the following capabilities: both ends Crimping: 4800 / hour (equivalent to UL1571 # 32 to # 14, cut length 40mm) function: the wire fixed size cut both ends of the peeling, both ends of the semi-skinned, both ends crimping, automatically set the the incision depth Prefeeding speed: 2500mm / s maximum cutting length: 40 ~~ 9999mm * shortest cut to length, different use of the pressing mold Cutting accuracy: cut length less than 100mm, deviation 0.5 mm (set cutting length × 0.002) more than 100mm cutting length deviation 1.0mm (set cutting length × 0.002) Stripping length: front: 1.00 to 15.00mm (semi-peeling length: 2.00 to 12.0mm) back-end: 1.00 ~ 8.00mm (semi-stripping length: 2.00 ~~ 6.0mm) applicable mold: cross to send the terminal card mode, direct-terminal card Molding Machine: 1.5/2.0/2.5TON universal mute terminal control mode: 7-inch color touch screen, smart PLC control detection device: with or without wire detection, the wire knot detection, pressing adverse detected, the air pressure detection power: single-phase: AC210 ~ 230V 50/60HZ 10A compressed air: 0.5MPa of approximately 140NL/min working temperature: 5 to 35 ° C (ambient temperature) Operating Humidity: 30 to 80% RH (non-condensing) Warranty: 1 year (excluding consumable parts) Mechanical Dimensions: 1000W × 800D × 1450H (mm) excluding protrusions Weight: about 350kg election Optional accessories: reel-terminal waste cutting device, put the line device, the closing line device fully automatic (double-side) terminal crimping machine, high precision machinery: 1. precision stepper motor drive, precise, stable ; 2. adopt Japan SMC pneumatic components, stable, efficient, and durable; 3 color touch screen, easy to operate; the 4 Japanese THK rails, stable and durable; 5. the Japanese Omron detect components, precision, and stability. Multifunctional mechanical: 1. Touchscreen set the corresponding parameters can be adjusted as follows: both ends of skinning both ends of the semi-skinned, both ends Crimping; able to adjust the corresponding parameters can be set by touching the screen : wire length, strip length, depth of incision. touchscreen set the appropriate parameters to fix: Cord length, stripping length; quality machinery: 1. feeding device with stepper drive control, wire length, skinned length without deviation; feeding device synchronized stepper motor to send line feeding line, stable, accurate, non-marking wire; 3 wire detection device presence detection, the wire knot detection, Crimping adverse detect, air pressure detection; 4. pressing device universal mute terminal machine, low noise, stable performance, can carry the cross, direct-card mode.