Automatic terminal crimping machine single terminal crimping machine single-head automatic terminal machine Model: RY-201 wire size: 0.03 ~ 2.0m ㎡ (equivalent to UL1571. # 32 ~ # 14), the maximum diameter of the outer diameter of the wire cortex 4.0 capacity: single-ended Crimping: 6000 / hour (equivalent to UL1571 # 32 to # 14, cut length 30mm /) Single-end Crimping single-ended twister: 4800 / h: wire sizing cut both ends of the skinned both ends of the semi-skinned, single-ended Crimping, twisting single-ended line, automatically setting the notch depth, crimping positions automatically set wire feed speed: 2500mm / s maximum discharge way: cut length 30 ~ 9999mm * shortest cut to length, deviation 0.5mm (set cutting length × 0.002), the pressing mold by the use of different cut-off accuracy: cut length less than 100mm cutting length of 100mm, deviation 1.0mm (set cutting length × 0.002) Stripping length front-end : 1.00 to 15.00mm (half peeling length: 2.00 to 12.0mm) back-end: 1.00 ~ 8.00mm (half stripping length: 2.00 ~~ 6.0mm) length of twisted wire twisting line: single-ended: Stripping length 3mm above applies mold: LEF card terminal mode, direct-terminal card Molding Machine: 1.5/2.0/2.5TON universal mute terminal machine control mode: 7-inch color touch screen, intelligent PLC control detection device: with or without wire detection, wire knotted detection, Crimping adverse detect air pressure detection power: single-phase: AC210 ~ 230V 50/60HZ 10A compressed air: 0.5MPa of approximately 140NL/min working temperature: 5 ~ 35 ℃ (ambient temperature) Operating Humidity: 30 to 80% RH (no condensation ) Warranty: 1 year (excluding consumable parts) Mechanical Dimensions: 800W × 600D × 1450H (mm) excluding protrusions Weight: about 300kg Optional Accessories: crimping means, terminal waste cut-off device, put the line device to close Crimping Machine automatic high-speed line device RY201 a high-precision machinery: 1. precision stepper motor drive, precision, and stability; 2 of Japan's new treasure reducer, Schneider servo motor drive, stable high-speed; 3. adopt Japan SMC pneumatic components, stable, efficient and durable; 4 color touch screen, easy to operate; 5. adopt Japanese THK rails, stable, durable 6. adopt Japan Omron detection components, precision, and stability. Two multi-purpose machinery: 1. Touchscreen set the corresponding parameters can be adjusted as follows: both ends skinned both ends of the semi-skinned, whether single-ended Crimping, whether single-ended twister; 2 can be set via the touch screen set the corresponding parameters can be adjusted: wire length, strip length, incision depth of 3 can be set via the touch screen to correction of the corresponding parameters: wire length, strip length; quality machinery: 1. feeding device stepper drive control, the wire length, strip length without deviation; 2. the feeding device uses two groups to send line round into the feed line, stable, accurate, non-marking wire; 3 wire detection device presence detection, wire knotted detection, Crimping adverse detection, air pressure detection; Crimping device universal mute terminal machine, low noise, stable performance, can carry the cross, direct-card mode.